T6s Antenna plugs Solder/Screw version

T6s Antenna plugs Solder/Screw version

ViaBlue ™ T6s Antenna connectors are high-quality high-end antenna connectors, the contact pins of which are made of bronze. All contact surfaces are 24 karat genuine gold-plated. The connector housing is made of aluminum. Two versions are available, a soldering version and a screw version.

20,89 (inc. VAT)

Contact us for more info

T6s antenna plug soldering version:

ViaBlue ™ T6s Antenna connectors are high-quality high-end antenna connectors, the contact pins of which are made of bronze. All contact surfaces are 24 karat genuine gold-plated. The connector housing is made of aluminum. Two versions are available, a soldering version and a screw version. For the soldering version cables can be installed up to 9.5 mm Ø, for the screw version cables up to 8 mm Ø can be mounted.

For assembly, the stripped cable ends are soldered to the contact part of the T6s antenna plug. The contact part can be completely detached from the plug housing. The M4 threaded screw serves as strain relief. With the enclosed diameters Decreasern, Which in the plug-in area reduce the internal diameter if required, cables of 3-9.5 mm Ø can be installed with high strain relief resistance for all listed cable thicknesses.

T6s Antenna plug Screw version:

The stripped cable is pushed into the plug housing. The conductor is guided through the insulation into the Pinzylinder, the twisted 360 ° turned mass is pressed up to the insulation stop. By tightening the pin screw as well as the inner strain relief screw, the cable is firmly fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: 5 mm Ø with high strain relief strength for all listed cable thicknesses. T6s Antenna plug Screw version: The stripped cable is pushed into the plug housing. The conductor is guided through the insulation into the Pinzylinder, the twisted 360 ° turned mass is pressed up to the insulation stop. By tightening the pin screw as well as the inner strain relief screw, the cable is firmly fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: 5 mm Ø with high strain relief strength for all listed cable thicknesses. T6s Antenna plug Screw version: The stripped cable is pushed into the plug housing. The conductor is guided through the insulation into the Pinzylinder, the twisted 360 ° turned mass is pressed up to the insulation stop. By tightening the pin screw as well as the inner strain relief screw, the cable is firmly fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: The stripped cable is pushed into the plug housing. The conductor is guided through the insulation into the Pinzylinder, the twisted 360 ° turned mass is pressed up to the insulation stop. By turning the pin screw as well as the inner strain relief screw, the cable is securely fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: The stripped cable is pushed into the plug housing. The conductor is guided through the insulation into the Pinzylinder, the twisted 360 ° turned mass is pressed up to the insulation stop. By tightening the pin screw as well as the inner strain relief screw, the cable is firmly fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: By turning the pin screw as well as the inner strain relief screw, the cable is securely fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed. Technical specifications: By turning the pin screw as well as the inner strain relief screw, the cable is securely fixed in the plug housing. Finally, the two outer screws are tightened after sliding the aluminum sleeve. For the T6s screw version, cables of 7-8 mm Ø can be installed.

Technical specifications:

  • Description: T6s Antennenstecker
  • Max. Outer diameter: 13.5 mm
  • Contact: TV male / female Norm
  • ROHS Directive / Conformity: ROHS compliant
  • Finishing: 24 carat gold plating
  • Total length: 41 mm
  • Packing unit: 1 Pair
  • Labeling: black
  • Screws: 1.5 mm hexagon socket